Measured and fished the right wing wires down the sleeve in front of the right door frame. All were 18 ga. shielded wires, the landing lights and wingtip lights were 4 conduit, GoPro power supply was a single shielded 18 gauge. My pins that load into my D-Subs only allow for 20-22ga. so I had to splice in 22 ga. wire using solder splices, all connections were finished in heat shrink tube for a nice clean look. Grounds were made using the shielding and a solder spliced pigtail.
Final routing for the EMS wires was made, right side will be routed from the left to right along the firewall using adel clamps. EMS wires for EGT's and CHT's will be routed down the engine mount to avoid clutter and create working space in the future