Oct 09, 2023     Rivet Firewall Recess to Firewall - (1.5 hours)       Category: Firewall

Rivet Firewall Recess to Firewall

  Oct 07, 2023     Mount ANL fuse block - (2 hours)       Category: Firewall

Mount the 60A ANL fuse block to the firewall. Fabricate and install #4 wire between the fuse block and master solenoid.

  Sep 30, 2023     Mount manifold and terminal block - (4 hours)       Category: Firewall

Move sensor manifold on firewall to align with center rib for added stiffness. Mount terminal block to firewall. Terminate sensor wiring from EMS at terminal block.

  Aug 05, 2023     A few wires - (1 hour)       Category: Firewall

Attach master solenoid coil wire and primary bus power to cockpit. File the split rocker switch opening to 1.25" tall.

  Aug 04, 2023     Primary Battery grounding strp - (.5 hour)       Category: Firewall

Attach ring terminal to grounding strap and attach strap to firewall and primary battery

  Jul 27, 2023     Add aircraft ground - (2 hours)       Category: Firewall

Create battery ground to aircraft frame on firewall for primary and secondary batteries. Need to install a ring terminal on the ground braid to the primary battery.

  Jul 09, 2023     Add penetrations for cabling and vacuum line - (4 hours)       Category: Firewall

Add firewall penetrations for vacuum line, sensor wiring, LIghspeed Ignition trigger wires, and cockpit power.

  Apr 29, 2023     Install copper bus bar - (1 hour)       Category: Firewall

Fabricate and install copper bus bar connecting master contactor and starter solenoid.

  Apr 28, 2023     Mount heat control cable and electrical components - (10 hours)       Category: Firewall

Drill firewall heater control cable penetration and mount the fitting and cable. Create doubler plate to mount the master contactor and starter solenoid to firewall. Add nut plates to firewall and firewall stiffener angles, and mount components.