Sep 15, 2012     Assembled and installed right inner and outer belcranks       Category: Spar

Assembled and installed right inner and outer belcranks. Primed belcranks and bearing covers.

  Sep 12, 2012     Clecoed rear spars to rear ribs and riveted Category: Spar

Clecoed rear spars to rear ribs and riveted

  Sep 09, 2012     Primed the rear spar and ribs Category: Spar

Primed the rear spar and ribs

  Sep 08, 2012     Cleaned and de-burred all rear spar pieces and rear ribs Category: Spar

Cleaned and de-burred all rear spar pieces and rear ribs

  Sep 05, 2012     Worked on rear spar - cut hinges apart, drilled and clecoed       Category: Spar

Worked on rear spar - cut hinges apart, drilled and clecoed. Drilled into rear ribs. Did the left and right rear spars.

  Aug 27, 2012     Picked up the professionally primed empennage parts       Category: Spar

Picked up the professionally primed empennage parts

  Aug 25, 2012     Clecoed and riveted right wing ribs to spar.       Category: Spar

Clecoed and riveted right wing ribs to spar.

  Aug 22, 2012     Primed the spars and ribs.       Category: Spar

Primed the spars and ribs.

  Aug 20, 2012     Cleaned an ddeburred all wing frame parts used so far. Category: Spar

Cleaned an ddeburred all wing frame parts used so far.

  Aug 18, 2012     Drilled out the right wing frame Category: Spar

Drilled out the right wing frame. Put the left wing together and drilled that out to #30. Marked all parts and took the wings apart.

  Aug 13, 2012     Started drilling and fitting ribs       Category: Spar

Started drilling and fitting ribs. Called Randy - he said that text and drawings were right - parts may be mis-labeled (they were!). He suggested checking RansClan for a picture of the wing ribs. We did and confirmed that we need to use the ribs marked left on the right wing. Clecoed the rest of the ribs to the right spar.

  Aug 11, 2012     Started working on the right wing       Category: Spar

Started working on the right wing. Straightened the ribs using fluting pliers. Modified a couple of the nose ribs to fit around the spar (cut out .2 and .6") Note: next time we need to do this, drill a hold in the corner of the cutout and cut to that. Ribs 6 and up look backwards - need to call RANS on Monday.